User's Manual

0: Toggle between RF Bands

1: Set Hop Pattern (N/A)

2: Set Hop Frequency Offset (N/A)

3: Exclude a Range of Frequencies from Hop Pattern (N/A)

4: Set RF Transmit Frequency (Licensed Band only)

5: Set RF Transmit Power

6: Set Maximum Radio Separation

7: Print Hop Frequencies (N/A)

2: Bit Rate and Modulation Menu

0::D Toggle between data rates and modulation methods

3: Network Menu

0: Set Operating Mode (Master; Slave; Repeater)

1: Set Network Type (M to S; M to R to S; M to xS)

2: Set Network Address (unique 9-digit value)

3: Set Upstream Device Address

4: Set Downstream Device Address

5: Set Maximum Payload Size, Master

6: Set Maximum Payload Size, Slave

7: Set Device Address

4: Utilities Menu

0: Scan RF Band

1: Download Firmware Update

2: Scan Network (for information on other radios in the network)