User's Manual

12
Following this, the standard menu based prompt will be displayed. Using this interface, the radio can be
controlled and the following parameters can be configured:
Operation Reference Map
0: Main Configuration Menu
0: Serial Menu
0: Set Data Serial Bit Rate
1: Set Data Serial Framing
2: Set Data Serial Protocol
3: Set Baud Clock Multiplier
1: RF Menu
spi_init(SPI_BUS_0)
spi_init(SPI_BUS_1)
twi_init()
iox_init()
pll_init(TRUE)
interrupt_init()
timer_init()
mon_init()
Xetawave Bootloader revision x.xx.xxx for rev 4 board
Booting . . .
spi_init(SPI_BUS_0)
spi_init(SPI_BUS_1)
twi_init()
iox_init()
pll_init(TRUE)
interrupt_init()
timer_init()
if_init()
synth_init()
params_load()
sport_init(SPORT_BUS_0)
sport_init(SPORT_BUS_1)
daca_init()
dac_init()
recv_init()
xmit_init()
crc_init()
pwm_init()
watchdog_init()
mon_init()
Starting . . .