User's Manual

2
Federal Communications Commission
This device complies with Title 47 CFR Part 90 of the federal code. The device complies
with 47CFR § 1.1310, Table 1, Limits for General Population/Uncontrolled Exposure for
MPE (maximum permissible exposure) to electromagnetic fields, when installed and
operated as described herein.
This device must be operated as supplied by XetaWave LLC. Any changes or
modifications made to the device without the express written approval of XetaWave LLC
will void the user’s authority to operate the device, and may result in regulatory
violations and liabilities.
Caution
The Xeta4-TMFA has a maximum transmitted output power of 10 watts when used in
compliance with FCC regulations in the 450-470 MHz frequency bands. The transmit
antenna shall be kept at least 187 cm from physical space where humans may exist,
based on a maximum antenna gain of 11.2 dBi.
See FCC Exposure Compliance on page 4 for more details and RF exposure
calculations.
These limits are designed to provide reasonable protection against harmful energy and,
if not installed and used in accordance with the instructions, may result in human
exposure to excessive RF energy.
This device must be installed in a host unit provided by XetaWave, LLC for fixed
installations.
Integration FCC ID
When the module is installed inside another device, the outside of the device into which
the module is installed must display a label referring to the enclosed module.
The exterior label shall use the wording: ‘Contains FCC ID: PEJ-938240’.
FCC
Notifications