User's Manual

Printer Settings
Phaser® 6360 Color Laser Printer
4-11
Using the Control Panel
To select a Tray 2–N mode setting on the control panel:
1. Select
Paper Tray Setup, and then press the OK button.
2. Select
Tray 2-N Mode, and then press the OK button.
3. Select the appropriate setting, and then press the OK button.
Using CentreWare IS
To select a Tray 2–N mode setting using CentreWare IS:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left navigation panel, and then select Printer Defaults.
5. Select the appropriate setting in the Tray 2-N drop-down list.
6. Click the Save Changes button at the bottom of the page.