User's Manual

Printer Settings
Phaser® 6360 Color Laser Printer
4-9
Paper Handling Settings
This section includes:
■ Selecting Tray 1 (MPT) Mode on page 4-9
■ Selecting Tray 2–N Mode on page 4-10
■ Setting the Duration for the Tray 1 (MPT) Prompt on page 4-12
■ Setting the Duration for the Tray 2–N Prompt on page 4-13
■ Changing the Load Paper Timeout on page 4-14
Selecting Tray 1 (MPT) Mode
The Tray 1 (MPT) Mode setting specifies:
■ How Tray 1 (MPT) paper type and size are determined when you load paper in the tray but
do not select the paper type and size on the control panel.
■ When Tray 1 (MPT) is used for print jobs.
To select the Tray 1 (MPT) mode setting, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Setting Description
Dynamic
(Factory default setting)
■ Uses the settings from the next print job that prints from Tray 1 (MPT)
to determine the paper size and type.
■ Printer will print from Tray 1 (MPT) when it is specified in the printer
driver or is automatically selected due to its paper matching a job's
requested paper.
Static
■ The paper size and type already set for Tray 1 (MPT) stay in effect.
■ Printer will print from Tray 1 (MPT) when it is specified in the printer
driver or is automatically selected due to its paper matching a job's
requested paper.
Automatic
■ Uses the settings from the next print job that prints from Tray 1 (MPT)
to determine the paper size and type.
■ Printer will print from Tray 1 (MPT) when paper is loaded, unless a
different tray is specified in the printer driver.