User's Manual

Using Color Corrections
Phaser® 6360 Color Laser Printer
1-9
To adjust the color in your job through a supported driver:
Adjusting the Automatic Color Correction
The Automatic color correction selection is designed to apply the best color correction to each
element (text, graphics, and images). If needed, you can select the color table being used for
these elements in your jobs.
You can make adjustments to RGB colors, CMYK colors, and spot colors as shown in the
following table:
Note: The Spot Color tab has an option to allow the printer to manage spot colors.
To use the default color table associated with a particular element on the tab, you can select
Automatic or click the Reset button.
If required in specific circumstances, you can make additional color adjustments to the
lightness, saturation, contrast, cyan/red color variation, magenta/green color variation, and
yellow/blue color variation used for a particular element.
Operating System Steps
Windows 2000 or later
PostScript Driver
1. Select the Color Options tab.
2. Select the desired color correction.
3. If desired, click the More Color Adjustments button to open the More
Color Adjustments dialog box.
4. Make the desired adjustments to the sliders for your job.
5. If desired, select Apply to CMYK.
6. Click the OK button to save your changes in the More Color
Adjustments dialog box.
Mac OS X, version 10.2
and higher
1. In the Print dialog box, select Image Quality from the drop-down list.
2. Select the desired color correction.
3. If desired, select Print Settings on Page.
4. Click the More Options button to open the Color Adjustments dialog
box.
5. Make the desired adjustments to the sliders for your job.
6. If desired, select Apply to CMYK.
7. Click the OK button to save your changes in the Color Adjustments
dialog box.
Custom Automatic Color Description
Office Color Controls the RGB color adjustments.
Press Match Controls the CMYK color adjustments.
Spot Color Controls spot color matching.