User Guide 701P44865 6204 Wide Format Solution Wide Format Scan Service
Xerox Corporation Global Knowledge & Language Services 800 Phillips Road Bldg. 845-17S Webster, NY 14580 Copyright © 2006 Xerox Corporation. All rights reserved. Printed in the United States of America.
Table of contents Preface ..........................................................................................................................................................iii Using this Guide........................................................................................................................................... iv Conventions ..................................................................................................................................................
ii Wide Format Scan Service User Guide
Preface Thank you for using the Xerox Wide Format Scan Service. This software is designed expressly for the Xerox 6204 Wide Format Copier/Printer. This User Guide describes the procedures and precautions involved in installing and operating the Xerox Wide Format Scan Service. Refer to the Xerox 6204 Wide Format Solution User Guide for details on how the Copier/Printer and this software interact.
Using this Guide This guide consists of the following chapters: 1 Installing Wide Format Scan Service Provides instructions for installing the Wide Format Scan Service software on a workstation. 2 Starting Wide Format Scan Service Explains how to start Wide Format Scan Service and use the features of the [Wide Format Scan Service] window.
Conventions This User Guide uses the following symbols and conventions: < > Indicates the keys on the keyboard. EXAMPLE [ ] Indicates the menus and display items on the screens. EXAMPLE “ “ Press the key. Select either the [On] or [Off] button. Indicates areas of reference within this User Guide. EXAMPLE Service.” Refer to “1 Installing Wide Format Scan IMPORTANT Indicates important information which you should read. NOTE Indicates additional information on operation or features.
Operating Environment The following is the operating environment of the Wide Format Scan Service.
1 Installing Wide Format Scan Service Instructions for installing Wide Format Scan Service follow. Before beginning the installation, log on to Print Services on Web as Administrator, select the Properties tab, and perform the following: 1. Confirm that the settings for the IP Address and Subnet Mask are correct. 2. Confirm that both FTP and SNMP are enabled. NOTE The procedure below is written for Windows® XP Professional systems.
6. Double click the [Disk1] folder. The contents of the folder will display (Fig. 4). Figure 4 7. Double click the [setup.exe] icon to activate the installer program. The [Xerox Wide Format Scan Service] screen (Fig. 5) will display, followed by the [Wide Format Scan Service - InstallShield Wizard] Welcome screen (Fig. 6).
Figure 6 8. Click the [Next] button on the [Wide Format Scan Service InstallShield Wizard] Welcome screen. The [Choose Destination Location] dialog box will display (Fig. 7).
9. Either accept the default Destination Folder or browse to a another location of your choice, and then click the [Next] button. The [Ready to Install the Program] screen will display (Fig. 8). Figure 8 10. Click the [Install] button. The [Setup Status] screen (Fig. 9) will display, and the installer will begin the installation of the program files.
When the installation is complete, the [InstallShield Wizard Complete] screen will display (Fig. 10). Figure 10 11. Click the [Finish] button and remove the CD ROM. The installation process places two shortcuts on the Desktop, one for Wide Format Scan Service Viewer and the other for the Wide Format Scan Service (Fig. 11).
6 Wide Format Scan Service User Guide
2 Starting Wide Format Scan Service Wide Format Scan Service enables a user to retrieve to a workstation the documents which were previously scanned and stored on the Xerox 6204 Wide Format Copier/Printer. Once the image information is retrieved, it can be edited and saved, then printed on the Copier/Printer. Printing is performed using the Wide Format Scan Service Viewer (see “9 Using Wide Format Scan Service Viewer”). Edited image information cannot be returned to a Copier/Printer mailbox for storage.
Starting the Application NOTE You cannot use Wide Format Scan Service and Wide Format Network TWAIN Source at the same time. To start Wide Format Scan Service: Either select the [Wide Format Scan Service] shortcut on the Desktop or select [Start] > [All Programs] > [Xerox] > [Wide Format Scan Service] > [Wide Format Scan Service]. The [Wide Format Scan Service] window (Fig. 1) will display.
Overview of the [Wide Format Scan Service] Window The [Wide Format Scan Service] window (Fig. 2) contains these features: Menu Bar The Menu Bar provides access to the File, Edit, View, Tools, and Help menus and submenus. Tool Buttons Tool Buttons provide convenient shortcuts for frequently performed tasks. There are four categories of tool buttons: Common, Windows Folder, Mailbox Service, and Edit Images; all are described in this chapter.
NOTE When you pause the cursor over a tool button, a tool tip will display and a description of the button will appear in the [Status Bar] (see Fig. 2). NOTE The tool buttons that display in the [Wide Format Scan Service] window will change based on which item is selected in the [Service Area]. EXAMPLE Selecting the folder that contains imported documents will cause the Windows folder Tool Buttons to display (Fig. 3).
Tool Button Functions The tables below define the functions of the tool buttons on the [Wide Format Scan Service] window. Common Tool Buttons Icon Function Description New Adds a Windows folder, a Mailbox, or an Edit Images icon (for Skew Correction, Despeckle, or Image Rotation) to the [Service area]. Delete Deletes the selected folder or file. Cut Cuts the selected folder or file. Copy Copies the selected folder or file. Paste Pastes the folder or file that has been copied or cut.
Edit Images Tool Buttons Icon 12 Function Description Store File Stores multiple files so they can be batch processed. Execute Stored File Executes the editing of the stored files. Move Up Moves the selected file up. Move Down Moves the selected file down. Move to Top Moves the selected file to the top. Move to Last Moves the selected file to the end.
Wide Format Scan Service Menus This section describes each of the items in the menus on the Wide Format Scan Service Menu Bar. File Menu Item Description New Adds Windows folders, mailboxes, and Edit Images icons to the [Service Area]. The submenu consists of the following: • Windows Folder: Displays the [Windows Folder Properties] window to enable adding Windows folders to Wide Format Scan Service. • Mailbox: Displays the Mailbox Setup Wizard for creating a Wide Format Scan Service mailbox.
View Menu The selections displayed on the View Menu differ based on which folder or service is selected in the [Service Area]. Item Description Toolbar Shows or hides the Toolbar. Status Bar Shows or hides the Status Bar. The status bar is displayed by default. Refresh Refreshes the display. Rechecks the Copier/Printer mailbox for documents if the Wide Format Scan Service mailbox is highlighted when Refresh is selected.
Tools Menu The selections displayed on the Tools Menu differ based on which folder or service is selected in the [Service Area]. Item Description Retrieve Displays in the Tools Menu when a Wide Format Scan Service mailbox is selected. Retrieves file(s) from a Copier/Printer mailbox to your computer.. Create New Folder Displays in the Tools Menu when a Windows folder is selected. Creates a new Windows folder. Start Wide Format Scan Service Viewer Starts Wide Format Scan Service Viewer.
16 Wide Format Scan Service User Guide
3 Setting Up the Program Defaults The Wide Format Scan Service [Detailed Settings] dialog box (Fig.
Polling The Wide Format Scan Service allows you to either manually or automatically retrieve documents from the mailbox on the Xerox 6204 Wide Format Copier/Printer. If you choose to retrieve documents automatically, you may either accept the default setting of 20 minutes or specify an interval of from one to 60 minutes. NOTE If polling is enabled when you select a mailbox, the document list is not displayed. You must disable polling to view the mailbox document list. To set up the Polling Interval: 1.
File Formats The Wide Format Scan Service and the Wide Format Scan Service Viewer are compatible with TIFF, PDF, and CALS file formats. To associate one or more of these file formats with the Wide Format Scan Service Viewer: 1. Select the [File Format] tab. 2. Select the appropriate checkbox(es) at the left side of the file extension(s) listed on the window (Fig. 3). 3. Select [OK] to save the settings and close the dialog box or select another tab to make additional settings.
Media Size List The [Media Size List Settings] tab (Fig. 4) enables you to specify the media series and sizes which will be displayed in Wide Format Scan Service and Wide Format Scan Service Viewer. By default, all media sizes will display (setting = [Yes]) when you select a feature that normally displays a list of media sizes, for example, the [Title Block View Settings].
Display Units The [Millimeters/Inches] tab (Fig. 5) enables you to set up the units of measurement which will display in Wide Format Scan Service and Wide Format Scan Service Viewer. To change the default units of measurement: 1. Select the [Millimeters/Inches] tab. 2. Select either the [Millimeters] or the [Inches] radio button. 3. Select [OK] to save the setting and close the dialog box or select another tab to make additional settings.
Saving Custom Settings The [Export Setup File…] and [Import Setup File…] selections in the [File] menu enable users to save their customized program settings (Edit Image icons and Detailed Settings) and then reload them as needed, for example, after upgrading workstations. Exporting Custom Settings Perform the steps below to export your customized program settings as a data file: 1. Select [File] > [Export Setup File]. A [Save As] popup will appear (Fig. 6). Figure 6 2.
Importing Custom Settings Perform the steps below to reestablish your custom settings by importing a setup data file that was saved earlier. 1. Select [File] > [Import Setup File]. An [Open] popup will display (Fig. 7). 2. Select the previously saved setup data file, and then select [Save]. Wide Format Scan Service will import the setup file and incorporate your custom settings.
24 Wide Format Scan Service User Guide
4 Setting Up a Wide Format Scan Service Mailbox The purpose of a Wide Format Scan Service mailbox is to retrieve and display information about the scanned images which are stored in a mailbox on the Copier/Printer. Whenever you select the mailbox that you create in Wide Format Scan Service, the program connects to the Copier/Printer, checks the associated mailbox located there, updates the list of documents, and displays them in the [File Area] of the [Wide Format Scan Service] window.
Creating a Wide Format Scan Service Mailbox 1. Launch Wide Format Scan Service. 2. A new mailbox may be set up from the [Wide Format Scan Service] window in any one of the following ways: a. Select [File] > [New] > [Mailbox], or b. Select the [New] ( menu item, or c. ) button and then select the [Mailbox] Right click anywhere in the [Service Area], and then select [New] > [Mailbox]. The [Select a scanner] dialog box will open (Fig. 1).
3. Enter the IP Address of the Copier/Printer in the [Enter IP address:] field, and then click [Next]. The Wide Format Scan Service will search the subnet for the specified Xerox 6204 Wide Format Copier/Printer and then display it in the [Scanner List] (Fig. 2). Additional Xerox 6204 Wide Format Copier/Printers will appear in the list if they are connected to the subnet and are scan enabled. Figure 2 NOTE You can use the [Search Conditions…] and [New Search] buttons (Fig.
4. (Refer to Fig. 2) Select the appropriate Xerox 6204 Wide Format in the [Scanner List:] and click [Next], or double click the scanner name to connect to the Copier/Printer. The [Select a Mailbox] dialog box will display (Fig. 4) with the Copier/Printer’s mailboxes shown in the [Mailbox List]. Figure 4 5. Either select a mailbox from the [Mailbox List:] or enter the number of the mailbox in the [Mailbox Number:] field. 6. Enter the password you created when you set up the mailbox on the Copier/Printer. 7.
Figure 5 8. Click [Exit] to return to the [Wide Format Scan Service] window. The newly created mailbox will appear in the Mailbox folder in the [Service Area] (Fig. 6). Be sure to click the [+] sign at the left side of [Mailbox] to expand the item and display the new mailbox.
Deleting a Wide Format Scan Service Mailbox Deleting a mailbox from the [Service Area] removes the link between the Wide Format Scan Service and the mailbox on the Xerox 6204 Wide Format; it does not remove the mailbox from the Copier/Printer. Perform the steps below to delete a Wide Format Scan Service mailbox. 1. Select the mailbox you wish to delete and then select [File] > [Delete], or right-click the mailbox and select [Delete] from the menu that displays (Fig. 7). Figure 7 A confirmation popup (Fig.
5 Setting Up a Windows Folder When you retrieve scanned documents from the Copier/Printer you will be prompted to select a folder in which to store them. This folder may be located in [My Documents], on the [Desktop], or elsewhere on the workstation’s hard drive(s). Wide Format Scan Service refers to this destination folder as a Windows folder. This section of the guide explains the process for creating and deleting a Windows folder. Creating a New Folder 1.
2. Select [Create New Folder…]. A [New Folder] icon will be added within the Windows directory you selected in step 1 (Fig. 2). Figure 2 3. Rename the [New Folder] in the same way you would rename any Windows folder, that is, right click on the [New Folder], select [Rename], and enter a name for the folder. It is a good practice to use a name that clearly indicates the types of files in the folder.
Creating a Shortcut to the New Folder The process described below creates a shortcut to the folder that you just created to receive imported documents. This shortcut looks like a folder and will appear at the same level as the Desktop, My Documents, etc., in the tree view in the [Service Area]. 1. The following are three ways to create a new Windows folder shortcut (see Fig. 3): a. Right click anywhere in the [Service Area] and select [New] > [Windows Folder] when the menu displays, or b.
A [Windows Folder Properties] popup will display (Fig. 4). Figure 4 2. Enter the name of the new Windows folder in the [Folder Name:] field. 3. Either key-in the path to the folder in the [Location:] field or click [Browse] and select it. 4. Click [OK]. The new folder shortcut will be added and will appear in the Wide Format Scan Service window in the [Service Area] (Fig. 5). Henceforth, use the folder shortcut to display the imported documents.
Deleting a Windows Folder 1. To delete a Windows shortcut folder from the [Service Area]: a. Right click on the shortcut folder you wish to delete and then select [Delete] from the menu that appears (Fig. 6), or b. Select the Windows folder shortcut that you wish to delete and then select [File] > [Delete]. Figure 6 An informational popup will display, informing you that only the shortcut folder will be deleted (Fig. 7).
36 Wide Format Scan Service User Guide
6 Importing Stored Documents from a Mailbox Image files (in TIFF, PDF, and CALS formats) which are stored as documents in a Copier/Printer mailbox must be retrieved (imported) to a workstation to be edited using Wide Format Scan Service. This section of the guide explains the procedure for retrieving these documents.
Manual Import 1. Start the Wide Format Scan Service. 2. Click the [+] character at the left side of the Mailbox folder in the [Service Area]. The item will expand and show all of the mailboxes that have been set up (Fig. 1). Figure 1 3. Select the appropriate mailbox from those displayed in the [Service Area]. A [Please Wait] popup will display while the Wide Format Scan Service accesses the mailbox (Fig. 2). You may select [Cancel] to stop connecting to the mailbox or allow the process to continue.
4. When the popup closes, a list of the documents stored on the Copier/Printer will display in the [File Area] (Fig. 3). Notice that multi-page scanned documents may be identified by the number of pages indicated in the [Pages] column. Multi-page Figure 3 5. To retrieve one or more of the listed documents, either: a. (Fig. 4) Left click the Document Number, and then click the [Retrieve] ( )button, or b. Right click the Document Number, and then select [Retrieve] from the menu that appears, or c. a.
A [Browse for Folder] dialog will open (Fig. 5). Figure 5 6. Select the destination folder for the selected document(s) and click [OK]. The stored document(s) will be retrieved from the Copier/Printer and saved in the selected folder.
Auto Import Documents may be automatically retrieved from a mailbox on the Copier/Printer at an interval of your choice. Auto Import is enabled as follows: 1. Right click on the mailbox and then select [Properties]. The [Mailbox Properties] dialog box (Fig. 6) will display. Figure 6 2. Select the [Polling] checkbox to enable polling. 3. Click [OK]. The window will close and an informational popup (Fig. 7) will appear.
42 Wide Format Scan Service User Guide
7 Displaying the Contents of the Windows Folder You display the contents of a folder that contains retrieved documents by selecting the folder shortcut in the [Service Area]. The documents stored within the folder will display in List View by default but you can choose to display them in Thumbnail View or Title Block View by selecting the appropriate Windows Folder buttons (Fig. 1). NOTE TIFF, PDF, and CALS file formats can be displayed in Thumbnail view and Title Block view.
Right-clicking a file in the [File Area] displays a menu that allows you to display the file’s properties (Fig. 2).
Creating the Title Block View Settings If you choose to display retrieved files in Title Block View (Fig. 3), you must set up the correct orientation and dimensions in the Title Block View Settings. Figure 3 1. Select [Tools] > [Title Block View Settings…]. The [Title Block View Settings] dialog box (Fig. 4) will open.
2. Specify the [Title Block Position:] for both the [Portrait Original] and the [Landscape Original] selections by choosing the appropriate locations from the pull-down menus. 3. Specify the [Width:] and the [Height:] for Portrait and Landscape originals, or select the [Setup by Image Size] checkbox and accept the default title box locations for the media sizes you typically use. 4. Click [OK].
8 Editing a Retrieved Document The Wide Format Scan Service provides three editing features: • • • Despeckle Image Rotation Skew Correction Each of these features and its use is explained in this chapter. The Wide Format Scan Service also allows you to create customized Edit Image icons which appear in the [Service Area]. These customized editing icons simplify and speed the editing process.
Despeckle NOTE Despeckle works with bitmap images only. The Despeckle feature helps remove unwanted noise (small black dots) from monochrome images and background from scanned color images, enhancing the appearance of the print. The feature can be changed to meet the editing requirements of individual documents by right clicking the [Despeckle] item in the [Service Area] and selecting [Properties]. This displays a [Despeckle Properties] dialog box (Fig.
Image Rotation The Image Rotation feature allows you to rotate a retrieved document 90° Counterclockwise, 180°, or 90° Clockwise. The direction of rotation is selected by right clicking the [Image Rotation] item in the [Service Area], selecting [Properties], and then making the desired selection in the [Image Rotation Properties] dialog box (Fig. 2). Click [OK] to save your selection.
When the [Add to Do Not Rotate List…] button is selected, the [Do Not Rotate] dialog box opens (Fig. 3). You can select by size and direction of rotation the media sizes which you do not wish to rotate.
Skew Correction NOTE Skew correction is designed to be used with line drawings or other documents which have clearly defined axes. Grayscale images may not respond to Skew Correction. The skew in the retrieved image should be 5° or less. The Skew Correction feature allows you to correct skew which may have occurred in scanning or which may be due to skewed printing of the scanned original.
Creating Customized Edit Image Icons By creating customized Edit Image icons you increase your productivity by reducing the need to change the Despeckle, Image Rotation, and/or Skew Correction properties. For example, you may find that a Skew Correction of one degree clockwise is almost always sufficient or that a Despeckle setting of 5 x 5 dots will yield the desired results for most of your documents.
2. Enter a name for the new Edit Image icon in the [Name:] field. The name may not exceed 64 characters (Fig. 6). 3. Select one of the available editing options from the pull down menu or specify a custom value (Fig. 6). Figure 6 4. Select [OK]. The newly created Edit Image icon will appear in the [Service Area] of the [Wide Format Scan Service] window (Fig. 7).
Editing the Document To edit a document, select it in the [File Area] and then drag and drop it on the desired Edit Image icon in the [Service Area]. When a document is edited in Wide Format Scan Service, the original file remains unchanged but the edited image is saved with a new file name, that is, with a number (-1, -2, etc.) appended to the original file name. 1. Select the standard or customized editing feature you wish to use and, if necessary, modify its settings. 2.
4. Select the location where you want the file to be saved, e.g., in the original folder or in a new one which contains only edited documents, and then click [OK]. Wide Format Scan Service will edit the image, save it to the specified location, and append a new version number to the file name (Fig. 3).
56 Wide Format Scan Service User Guide
9 Using Wide Format Scan Service Viewer The [Wide Format Scan Service Vierwer] window displays images one by one. You can use this window to edit and print images. Starting Wide Format Scan Service Viewer NOTE Although you cannot run Wide Format Scan Service and Wide Format Network TWAIN Source at the same time, you can run Wide Format Scan Service Viewer while Wide Format Network TWAIN Source is active. This section explains how to launch the Wide Format Scan Service Viewer.
Figure 1 58 Wide Format Scan Service User Guide
Overview of the [Wide Format Scan Service Viewer] Window The image below (Fig. 2) shows the [Wide Format Scan Service Viewer] window as it appears when a multi-page document is open. • The Page Tool buttons appear when a multi-page document is open, enabling you to move among the pages. • The File Tool buttons display when the folder containing the documents contains more than one image file. These buttons enable you to conveniently open the next file, the previous file, a specified file, etc.
Tool Button Functions The tables below define the functions of the Wide Format Scan Service Viewer tool buttons. Standard Tool Buttons Icon Function Description Open Opens the folder which contains the imported documents. Save Overwrites the edited file. Print Prints the displayed image. The maximum printable length is 3,276.7 mm, regardless of resolution. Undo Undoes the last action. Point Mode Changes the cursor into the Point Mode. The shape of the cursor becomes an arrow.
Zoom Tool Buttons Icon Function Description Reduce Zooms out of a displayed image. Fit Page Resizes a displayed image to fit completely within the display area. Fit Width Resizes a displayed image, fitting the image width in the display area. Fit Height Resizes a displayed image, fitting the image height in the display area. Enlarge Zooms into the displayed image. Upper Left Displays the upper left corner of an image. Lower Left Displays the lower left corner of an image.
File Tool Buttons Icon 62 Function Description Open Opens the folder which contains the imported documents, allowing you to select a file to open. First File Displays the first file in the folder. Previous File Displays the previous file in the folder. Next File Displays the next file in the folder. Last File Displays the last file in the folder.
Wide Format Scan Service Viewer Menus This section describes each of the items in the menus on the Wide Format Scan Service Viewer Menu Bar. File Menu Item Description Open Opens the most recently opened Windows folder which contains the retrieved documents Save Overwrites the previously saved file with the newly edited file. Save As Saves the edited file as a specified name in a specified location. Print Prints the file. The maximum printable length is 3,276.7mm (10.75 ft.
View Menu Item Description Mode Switches the mode for the cursor. The items displayed on the submenu are as follows: • Point Mode: The shape of the cursor becomes an arrow. • Scroll Mode: The shape of the cursor becomes a hand. The displayed image can be scrolled by locating the cursor on the image and then dragging it. • Area Mode: The shape of the cursor becomes a crosshair. To select an area of an image, press and hold the left mouse button, then drag the cursor over a portion of the image.
Opening a File Perform the following steps to open a file immediately after starting Wide Format Scan Service Viewer: 1. Select [File] > [Open] or click either one of the [Open] ( buttons. ) The contents of the most recently opened folder will display. 2. Select the file you wish to open and then click [Open], or navigate to another location and select the file. The file will open in Wide Format Scan Service Viewer if it was saved in a TIFF, PDF, or CALS format.
Editing: Reduce/Enlarge The Reduce/Enlarge functions are unique to Wide Format Scan Service Viewer, i.e., they are not available in Wide Format Scan Service. Using the R/E capabilities of Wide Format Scan Service Viewer you can reduce or enlarge a document to fit standard size media or you can specify a non-standard size. To use the Reduce/Enlarge feature: 1. Select [Edit] > [Reduce / Enlarge…], or Select the [Reduce / Enlarge…] button ( ). The [Reduce / Enlarge] dialog box (Fig. 3) will display.
Non-Standard R/E: To reduce or enlarge the image to a nonstandard size media, deselect the [Reduce /Enlarge to Fit Media Size] checkbox and then enter the desired width and height in the lower, [Reduce / Enlarge] fields. Be sure to select the [Lock Aspect Ratio] checkbox to ensure that the edited image maintains the same width-to-height ratio as the original. 3. Click [OK]. Wide Format Scan Service Viewer will resize the original image according to the entries in the [Reduce / Enlarge] dialog box. 4.
Editing: Area Mode The Area Mode feature permits you to select an area of a displayed image and then either delete the selected area or save it as a new file. The delete function is a useful tool for eliminating unwanted detail from an image. Delete Selected Area To delete a portion of an image: 1. Select the [Area Mode] ( ) button. 2. Drag the cursor over the portion of the image that you wish to delete. A dotted line will appear around the selected area (Fig. 4). 3.
Save Selected Area To save a portion of an displayed image as a new image: 1. Select the [Area Mode] ( ) button. 2. Drag the cursor over the portion of the image that you wish to save. A dotted line will appear around the selected area (Fig. 5). Figure 5 3. Resize the selected area, if necessary, by selecting and dragging one of the [Handles]. 4. Select the [Save Selected Area] ( will appear (Fig. 5). ) button. A [Save As] popup 5. Specify a location for the edited image and then click [Save].
70 Wide Format Scan Service User Guide
10 Uninstalling Wide Format Scan Service NOTE Log on as Administrator. There are five steps involved in uninstalling Wide Format Scan Service. 1. Click [Start] > [Control Panel] > [Add/Remove Programs]. The [Add/Remove Programs] window appears. 2. Select [Xerox Corporation Wide Format Scan Service] from the list and click [Change/Remove]. The InstallShield Wizard [Preparing Setup] window and then a confirmation popup will appear (Figure 1).
3. Select [Yes]. The [Setup Status ] screen appears and uninstallation begins. Figure 2 The [InstallShield Wizard Complete] screen displays when the uninstallation is complete (Figure 3). Figure 3 4. Select [Finish]. Uninstallation is complete.
Index A D Add to Do Not Rotate List… button, 50 Area Mode buttons, 59 Auto Correction mode, 51 Auto Import, 41 Delete Selected Area, 68 Deleting a Wide Format Scan Service Mailbox, 30 Deleting a Windows Folder, 35 Despeckle, 48 Despeckle Properties dialog box, 48 Detailed Settings, 17 Detailed Settings dialog box, 17 Disk1 folder, 1, 2 Display Units, 21 Displaying the Contents of the Windows Folder, 43 Do Not Rotate dialog box, 50 B Background, 48 Button Add to Do Not Rotate List…, 50 Mailbox Service T
F N File Formats, 19 File Menu, 9, 13 File properties, 44 File Tool buttons, 59 FTP, 1 Network Interface Card, vi Network requirements, vi New Folder icon, 32 New Search button, 27 Noise, 48 H O Hard Disk, vi Hardware requirements, vi Help Menu, 15 Operating Environment, vi Operating System, vi Overview of the Wide Format Scan Service Window, 9 I Image Rotation, 49 Image Rotation Properties dialog box, 49 Import Setup File, 23 Importing Custom Settings, 23 Importing Stored Documents from a Mailbox,
Starting Wide Format Scan Service, 7 Starting Wide Format Scan Service Viewer, 57 Subnet Mask, 1 Supported Device, vi T TCP/IP, vi TIFF, 19 Title Block Position, 46 Title Block View, 45 Title Block View Settings, 45 Title Block View Settings dialog box, 45 Tool Button Functions, 11 Tool Buttons Common, 9 Edit Images, 9 Mailbox Service, 9 Windows Folder, 9 tool tip, 10 Tools Menu, 9, 15 tree view, 9 U Uninstalling Wide Format Scan Service, 71 Units of measurement, 21 Using Wide Format Scan Service Viewer,
Prepared by: Xerox Corporation GKLS/K&DS, XGS 800 Philips Road Webster, New York 14580-9791 USA © 2006 by Xerox Corporation. All rights reserved. XEROX, The Document Company, the stylized X, 6204, and any identifying product names and numbers are trademarks of XEROX Corporation. All terms mentioned in this document which are known to be trademarks or service marks are appropriately capitalized. No part of this manual may be copied without prior written permission of Xerox Corporation. Printed in the U.S.
