User Manual

Page 10
Output Tray names
FreeFlow output locations correspond to different output tray names in the EX Print Server
user interface. The following table lists these equivalents:
Jobs without finishing are delivered to the HCS Top Tray or HCS Stacker Tray, if attached.
Jobs with finishing are delivered to the Finisher Top Tray or Finisher Stacker Tray.
Jobs with Coil Punch are delivered to the HCS Top Tray or HCS Stacker Tray, if attached,
otherwise they are sent to the Finisher trays.
Using EX Print Server FreeForm Masters from FreeFlow
FreeFlow Background Forms map to the EX Print Server variable data printing Use Master
feature.
TO USE A FREEFORM MASTER FROM FREEFLOW
1 Select Background Form on the FreeFlow Image Adjustment tab.
2 Type the form master number, as assigned on the EX Print Server, in the FreeFlow Form Name
dialog box. Do not type the master file name.
PCL print jobs cannot be set on the EX Print Server over IPP (Internet Printing
Protocol)
PCL files that contain job programming are not supported by the EX Print Server from
FreeFlow. Use the EX Print Server PCL printer driver if job programming is required for
your job.
FreeFlow Job Cancel
If you select Cancel from FreeFlow Status using the EX Print Server print path, the job does
not cancel on the EX Print Server, even though FreeFlow displays that the job was cancelled
successfully.
FreeFlow Print Manager EX Print Server
Printer’s Default
Automatic AutoSelect
Top Tray Offset Catch Tray (OCT), HCS Top Tray, or D4
Finisher Top Tray
Stacker D4 Finisher Stacker Tray or HCS Stacker
Stacker 2 D4 Finisher Stacker