User Guide

52
Chapter 3 Setup
3.2 Setting up the System Parameters
This procedure sets up all parameters required by the system.
Setting the Parameters from the Printer Control Panel
The following system parameters can be set up from the printer control panel.
The items that can be set up on the printer control panel and on Print Services on Web
are different.
It is possible to set these system parameters with the use of the copier control panel
for Xerox 6030 WF and Xerox 6050 WF. If the parameters are set with both the printer
control panel and the copier control panel, the values set most recently will be the
valid parameters.
• Refer to the User Guide for details on [Low power mode 1], [Low power mode 2]
and [Sleep Mode].
• Refer to "2.2 Operation from the Printer Control Panel" for detailed instructions on
printer control panel operations (page 22).
Menu Item Description
Set Date Sets up the internal clock. The parameters are set in the year,
month, day, hour and minutes in this order.
Spool in HD Sets up the method in which data is stored on the hard disk.
The default setting is [OVERFLOW].
[OVERFLOW] Stores intermediate data that exceeds the
capacity of the memory on the hard disk.
[ALWAYS] Stores all intermediate data on the hard
disk.
AUTO ROLL Sets whether the automatic paper switching function from
the roll to the tray and tray to the roll is to be set to [ON] or
[OFF].
The default setting is [OFF].
SPA PAPER WIDTH Sets the paper width for SP. JIS/ISO A paper. The default
value is [SP A1].
[SP. A1] 620 or 525mm
[SP. A2] 435 or 440mm
Smoothing Sets whether the pseudo 1200 dpi output should be set to
[ON] or [OFF]. The default setting is [OFF].