User Guide

Chapter 3 Setup

Setting the Parameters from Print Services on Web

It is possible to set up the TCP/IP, Serial, Centronics (optional), VPI (optional) and

SNMP parameters from Print Services on Web. The procedures for this are explained

below.

Operation Procedure

1 Start up Print Services on Web and display the [Properties] tab on the

Administrator Page.

2 Select the item to be set up from the [System parameters] menu.

The setup screen will be displayed on the right-hand side of the screen.

• The changed parameters become valid after the machine has been

rebooted.

• These procedures are performed on the Administrator Page.

Refer to "2.3 Operations from Print Services on Web" for details on starting up

Print Services on Web (page29).