User Guide

45
3.1 Setting up Communication Parameters
1. Select [ON] for [Static Routing], and then
press the <Set> key.
Press the < > key once it has been set.
2. Select [ADD] for the [ROUTING TABLE],
and then press the < > key.
3. Enter the destination address, and then press
the <Set> key.
Once it has been set, move the cursor to the
right-hand side and press the < > key.
4. Enter the routing (or Gateway) address, and
then press the <Set> key.
Typically not needed - enter
000.000.000.000 to move to Router
Address
To return to the previous menu, move the
cursor to the left-hand side and press the
< > key.
Static Routing
ON *
Adding items to the routing table
ROUTING TABLE
ADD
Dest. Address
123. 000. 000. 000
Router Address
123. 000. 000. 000