User Guide

42
Chapter 3 Setup
SNMP
The following communication parameters need to be set up.
SNMP can only be set up from Print Services on Web.
Menu Item Description
SNMP Sets whether to enable SNMP or not.
Community
String
Sets the Community string to be imbedded when the client
transmits SNMP packets.
Trap Transmission
Destination
Sets the IP address of the destinations (trap transmission
destinations) to which notifications are to be sent in the event
of an error occurring with the printer.
A maximum of 128 trap transmission destinations can be
registered.
Transmission Port Sets the port numbers of the trap transmission destinations.
Version Sets the version of the trap to be transmitted.
Permanence Sets whether the trap transmission destination information is to
be stored or not after the printer has been switched off. A
maximum of eight items can be enabled for permanence.