User Guide

17
2.1 Outline of 6030/6050 Wide Format Print Service
Size Input
The following two methods for judging the size of the input document are available:
• Automatic Calculates the coordinates of the input document and
automatically sets the closest size.
• Size Specification Directs the entry of the input document's paper size.
"Automatic" is used under normal circumstances. Specify the size manually if the
restrictions are to be placed on the input coordinates. When the size is specified, all areas
that exceed that size will be cut.
Paper Size Output
The following two methods for judging the size of the output paper are available:
• Automatic When "Automatic" is selected, printing size of the document is
enlarged or reduced automatically in accordance with the size
mapping table. Also, the actual size of the output paper or that of
the output roll paper is determined in accordance with the paper
mapping table or with automatic mapping.
• Size Specification When "Size Specification" is selected, the output paper size is
specified by direct entry. If the specified output paper size is
different from the input document size, the document can be
enlarged or reduced automatically to match the size of the paper.
"Automatic" is used under normal circumstances. Specify the paper size manually if all
output is to be unified on a single paper size.
• Refer to the "Setting the Parameters from Print Services on Web" section in "3.2
Setting up the System Parameters" for details on setting the extension logs (page
52).
• Refer to the "Setting up Logical Printers" section in "4.1 Basic Machine
Operations" for details on setting up logical printers (page 62).
Refer to the "Input Option" section of "4.5 Logical Printer Settings" for details on
available functions (page 84).
Refer to the "Output Option" section of "4.5 Logical Printer Settings" for details on
available functions (page 84).