User Guide

9
1.4 Switching the Power On and Off
Switching Off the Power
Switch off the power following the steps shown below.
[Operation]
1 Set the Main Power Switch to OFF.
2 Set the Scanner Power Switch to OFF.
3 Set the Circuit Breaker Switch to OFF.
Never switch off the power while printing is in progress. Failure to observe this
may result in paper jamming in the higher-temperature areas of the machine.
When the Remote Switch is set to
[Connect], and the Scanner is set to ON,
the power of the Printer and Scanner
can be switched on/off with the Main
Power Switch.
Switch off the Circuit Breaker Switch
when the machine is not to be used for
long periods of time.
Main Power
Switch
Circuit Breaker
Scanner Power
Switch