User Guide

240
Chapter 13 Specifications
13.2 Media Specifications
• For sharp image copying by 6030/6050 Wide Format, use media recommended by our
company.
• To prevent paper jams or uneven printing, do not use creased, wrinkled, or curled
media. It may result in a media jam and white blotches on copies.
• When using unusually flexible media, support the media as it comes out of the media
ejection port so that it will not be pressed against the media table and result in jams.
• Moisture is not good for media. For storage, wrap the media in our company's
wrapping paper and store it in a relatively dry place.
Vellum media especially should be put into a plastic or moisture-proof bag that
contains desiccant.
• When the machine is not used for a long period of time, remove the media and store it
accordingly.
*1 Option
*2 A4 size can only be fed vertically.
Item Description
Media type Bond, Vellum, and Film
Mass 52.3 to 81.4 g/m
2
(45 to 70 kg)
Size Roll : Minimum width 297 mm, maximum
width 914 mm (standard size paper)
Manual loading
*1
: Minimum width 210 mm, maximum
width 914 mm (standard size paper)
M.S.I.
*2
: A3 (horizontal feed), A4 (vertical/
horizontal feed)
Recommended
media
Bond (Roll) : E, ES-R, E (Heavier), and Green 100
Bond (Cut sheet) : L, P, ES-R, and Green 100
Vellum (Roll) : SX55 and GX75
Vellum (Cut sheet) : SX55
*2
and GX75
Film (Roll) : PF90
Film (Cut sheet) : PF90
Media not available Chemical-based paper
GSN65
Kent paper