User Guide

211
8.4 Loading Media Manually
8.4 Loading Media Manually
[Operations]
1 Adjust the (MSI) Multi Sheet Inserter/Manual
Feed Unit's side guide to fit the size of the media
that is to be printed.
2 Place the side of the media to be copied facing
upwards, and align it with the (MSI) Multi Sheet
Inserter/Manual Feed Unit's side guide.
3 Push the front edge of the media as far back as it
can go. The startup sound of the machine
operation is heard.
• The optional (MSI) Multi Sheet
Inserter/Manual Feed Unit is
required when making manually fed
copies.
• Standard paper having the width of
297 to 914 mm and the length of 210
to 2,000 mm can be used if the
(MSI) Multi Sheet Inserter/Manual
Feed Unit is installed.
Two or more sheets of A3 (horizontal
feed) and A4 (horizontal/vertical feed)
size paper can be set. Paper sizes
other than A3 (horizontal feed) and
A4 (horizontal/vertical feed) sizes can
only be set one sheet at a time.
Only Bond paper can be used in the
(MSI) Multi Sheet Inserter/Manual
Feed Unit.