User Guide

197
7.2 Automatic Cut
7.2 Automatic Cut
Operation Procedure
1 Select [Media] from the menu displayed on the
printer control panel.
2 Press the < > key.
The level from which the desired media is to be
selected will be displayed.
3 Press the < > key, and then select the roll that
is to have its leading edge cut.
4 Press the < > key.
The level from which the setting is to be
selected will be displayed.
5 Press the < > key and select <Trim>.
6 Press the < > key.
The level from which the number of cuts is to be
selected will be displayed.
7 Press the < > key and select either [1], [2] or
[3].
8 Press the <Set> key.
9 Press the <Set> key.
The leading edge cutting operation will be
started.
10 Press the < > key to return to the higher level.
Print Settings
Media
Media
Roll1
< > key
Media
Roll2
<> key
Media / Roll2
Type
< > key
Media / Roll2
Trim
<> key
Media / Roll2
Trim : 1
< > key
Media / Roll2
Trim : 2
<> key
Media / Roll2
Trim : 2 *
<Set> key