User Guide

176
Chapter 6 Ethernet Print Service (for UNIX)
6.3 Printing Using the ftp Command
Details of the ftp command are explained in this section.
Printing
This section explains the printing procedure using the ftp command.
Operation Procedure
1 Enter the ftp command and the network registered with a 6030/6050 Wide
Format host name (example: 6050WF) from the client workstation.
A message indicating that the connection has completed will be displayed.
2 Log on to 6030/6050 Wide Format. Enter a user name (example: ftpusr) pre-
registered in 6030/6050 Wide Format.
You are prompted to enter a password.
Bold characters represent input character strings in each example.
% ftp 6050WF
Connected to 6050WF.
220 6050 Wide Format FTP server ready
Name (6050WF:ftpusr):
Name (6050WF:ftpusr): ftpusr
331 Password required
Password:
"ftpusr" is the only user registered at shipping. Users can be added using Print
Services on Web. Refer to the "Setting the Parameters from Print Services on
Web" section in "3.2 Setting up the System Parameters" for further details
(page 52).