User Guide

159

Chapter 5 Setup Using the Printer Control Panel

5.5

Reprinting

This function reprints the file that was most recently printed.

It is possible to specify the number of copies to be printed within a range of 1 to 99.

Operation Procedure

1 Press the < > key with [OFFLINE PLOT]

displayed on the parameter selection screen.

2 Press the < > key.

3 Press the < > key.

4 Select the number of copies to be printed (1 to

99) with the use of the < > and < > keys, and

then press the <Set> key.

Press the < > key once it has been set.

5 Press the <Set> key when [SET:to Print.] is

displayed.

The file will be reprinted accordingly.

Reprinting is not possible with the Xerox 6030 WF or Xerox 6050 WF if a copy

operation is performed after a print operation.

In order for reprinting to function, you must have a job saved in memory.

Refer to "2.2 Operation from the Printer Control Panel" for detailed instructions on

printer control panel operations (page 22).

Move the cursor to the right and left with

the use of the < > and < > keys.

OFFLINE PLOT

REPLOT

Printed Copies

06 *

REPLOT

SET : to Print.