User Guide

148
Chapter 5 Setup Using the Printer Control Panel
PRINTED COPY
1 Display [PRINTED COPY] on the setup item
selection screen, and then press the < > key.
2 Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<> key.
The [Copies] and [Priority] parameters will be
displayed in that order.
3 Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
INPUT OPTION
1 Display [INPUT OPTION] on the setup item
selection screen, and then press the < > key.
2 Press the < > key.
3 Select either [AUTO] or the various paper sizes
with the use of the < > and < > keys, and
then press the <Set> key.
1. Press the < > key immediately after
pressing the <Set> key.
2. Select the link count with the use of the < >
and < > keys, and then press the <Set> key.
[Priority] will only be displayed for
Versatec data.
EDIT HPGL :06
PRINTED COPY
PRINTED COPY
Copies
Copies
01 *
EDIT HPGL :06
INPUT OPTION
INPUT OPTION
Size
Size
AUTO *
Size
A0 *
When the page size has been selected
Connect
02 *