User Guide

144
Chapter 5 Setup Using the Printer Control Panel
Select the paper size with the use of the < >
and < > keys, and then press the <Set> key.
1. Select either [Auto] or [MANUAL], and then
press the <Set> key.
2. Press the < > key if [MANUAL] has been
selected to move to the paper size setup
screen.
3. Select the paper size with the use of the < >
and < > keys, and then press the <Set> key.
SPLIT
1 Display [SPLIT] on the setup item selection
screen, and then press the < > key.
2 Select whether or not to perform fragmentation
printing with the use of the < > and < > keys,
and then press the <Set> key.
Press the < > key once the selection has been
set if fragmentation printing is to be carried out.
3 Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<> key.
The [Length], [Page No] [Margin] and [Mark]
parameters will be displayed in that order.
4 Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
Mapping
A2 *
When [Mapping] has been selected
Media
MANUAL *
When [Media] has been selected
Media.
A0
Media.
A1 *
EDIT HPGL :06
SPLIT
SPLIT
YES *
Split Mode
Length
Length
01189 mm *