User Guide

141
5.2 Setting up Logical Printers
2. Select the paper size with the use of the < >
and < > keys, and then press the <Set> key.
Press the < > key once it has been set.
3. Select either [OffsetX] or [OffsetY] with the
use of the < > and < > keys, and then press
the < > key.
4. Select the [OffsetX] or [OffsetY] offset
locations with the use of the < > and < >
keys, and then press the <Set> key.
• Move the cursor to the right and left
with the use of the < > and < >
keys. To return to the previous menu,
move the cursor to the left-hand side
and press the < > key.
• Align the cursor with the [+] symbol
and then press the < > key to change
it to the [
– ] symbol.
Size
A0 *
Set Offset Value
OffsetX
OffsetX
+000 mm *