User Guide

136
Chapter 5 Setup Using the Printer Control Panel
5 Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<> key.
The [Color] and [Endstyle] parameters will be
displayed in that order.
6 Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
DEF.MULTI PEN (Versatec only)
1 Display [DEF.MULTI PEN] on the setup item
selection screen, and then press the < > key.
2 Press the < > key.
3 Select the starting number and ending number of
the relevant pens with the use of the < > and
< > keys, and then press the <Set> key.
4 Press the < > key once it has been set.
5 Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<> key.
The [Color] and [Endstyle] parameters will be
displayed in that order.
6 Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
EMULATION (HPGL only)
Move the cursor to the right and left with
the use of the < > and < > keys. To
move to the next menu, move the cursor
to the furthest position on the right, and
then press the < > key.
Pen No. 05
Endstyle
Endstyle
ROUND *
EDIT Versatec :05
DEF. MULTI PEN
DEF. MULTI PEN
Pen No.
From – To
00 - 00
Pen No. 00 – 12
Endstyle
Endstyle
ROUND *