User Guide

135
5.2 Setting up Logical Printers
3 Select the pen width with the use of the < >
and < > keys, and then press the <Set> key.
PEN STYLE (Versatec only)
1 Display [PEN STYLE] on the setup item
selection screen, and then press the < > key.
2 Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<> key.
The [Jointstyle], [Endstyle] and [Dashstyle]
parameters will be displayed in that order.
3 Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
DEF.SINGLE PEN (Versatec only)
1 Display [DEF.SINGLE PEN] on the setup item
selection screen, and then press the < > key.
2 Press the < > key.
3 Select the pen printer number with the use of the
< > and < > keys, and then press the <Set>
key.
4 Press the < > key once it has been set.
Move the cursor to the right and left with
the use of the < > and < > keys. To
move to the next menu, move the cursor
to the furthest position on the right, and
then press the < > key.
Width
005 *
EDIT Versatec :05
PEN STYLE
PEN STYLE
Jointstyle
Jointstyle
UNJOIN *
EDIT Versatec :05
DEF.SINGLE PEN
DEF.SINGLE PEN
Pen No.
Pen No.
05 *