User Guide

113
4.5 Logical Printer Settings
Menu Item Description
Number of
Joints
Sets the number of copies to be printed consecutively from a range of
0 to 99 when [Size] has been specified. The default setting is [0].
A value that subtracts 1 from the length of the standard size will be
set for [Connect]. For example, in the event of 4A3, 3 will be set for
the [Connect].
Lead and
Trail Margins
Specifies whether or not margins are to be added. The default setting
is [No].
[NO] No margins are added.
[ALL] Top and bottom margins are added to all data.
[LONG] Top and bottom margins are added only to long images.
Lead Margin Sets the top margin within a range of 0 to 999 mm when the [Margin]
parameter has been set to anything other than [NO].
Trail Margin Sets the bottom margin within a range of 0 to 999 mm when the
[Margin] parameter has been set to anything other than [NO].
I
nput image that is longer
than the standard size
Output image
In the case of [AUTO]
Output in a size that
is the standard shape
increased in a multiple
of integers.
In the case of [OTHER
]
The same size as the
input image is output.
4A3
Connect = 3
A3
A3 A3 A3
P
aper feed
direction
Top margin
Bottom marg
in
• Margin
• Connect
• Paper Size