User Guide

111
4.5 Logical Printer Settings
Input Option
Sets the input image size. The following two judgment methods are available for input
image size.
• Automatic (AUTO)
Calculates the coordinates of the input image and automatically determines the nearest
size.
• Specify Size
Enables the paper size of the input image to be entered directly. The paper size can be
selected from standard sizes and user-defined sizes.
This is usually set to [AUTO]. However, it is possible to set the paper size. Any part of
the image that exceeds the size of the paper specified will be cut.
Settings The settings for this function are as follows.
Menu Item Description
Paper Size This parameter can be selected from [AUTO] or the various paper
sizes.
The default setting is [AUTO].
The selection items for the paper size will differ in accordance
with the [Input size] parameter set for the Media series.
Number of
Joints
Sets the number of copies to be printed consecutively from a
range of 0 to 99 when [Size] has been set to [AUTO]. The default
setting is [1].
A value that subtracts 1 from the length of the standard size will
be set for [Connect]. For example, in the event of 4A3, 3 will be
set for the [Connect].
Refer to the section on "Media Series" for further details on paper groups (page 86).
4A3
Connect = 3
A3
A3 A3 A3