User Guide

108
Chapter 4 Basic Machine Operations
Skip Command
Enables and disables the PS command.
Settings The settings for this function are as follows.
EOP Command
Enables and disables the EOP command.
Settings The settings for this function are as follows. The default value for all parameters is
[Enable].
These settings are only valid with HPGL data.
Menu Item Description
PS Command [OFF] Enables the PS command.
[ON] Disables the PS command.
The default setting is [ON].
These settings are only valid with HPGL data.
Menu Item Description
SP:Pen0 Sets whether the SP: Pen0 command is to be enabled or not.
PG:Adv Page Sets whether the PG: Adv Page command is to be enabled or not.
NR: Sets whether the NR command is to be enabled or not.
FR: Sets whether the FR command is to be enabled or not.
AF: Sets whether the AF command is to be enabled or not.
AH: Sets whether the AH command is to be enabled or not.