User Guide

106
Chapter 4 Basic Machine Operations
Split Drawing
It is possible to fragment images that exceed 1,189 mm in length for output purposes.
It is also possible to add marks for positioning purposes on each fragment. A maximum
of 30 fragmentations are possible.
Settings The settings for this function are as follows.
Menu Item Description
Split drawing
mode
Set to either [Do not split] or [Split].
The default setting is [Do not split].
Split length Sets the width of fragmentation printing within a range of 1,189
to 15,000 mm.
The default settings is [1,189 mm].
Page number
printing
Sets whether or not a page number is to be printed.
The page number will be printed in the format of [present page/
number total number of pages].
The default setting is [Off].
Paper margin Sets the margin for the areas where the pages are joined within
a range of 0 to 90 mm.
The default setting is [0 mm].
Alignment mark
printing
Sets whether or not to print positioning marks. The default
setting is [OFF].
1/3
2/3
3/3
Fragment
length
Fragment
length