User Guide

90
Chapter 4 Basic Machine Operations
Versatec Pen Style
Sets the pen specifications for VCGL data.
Settings The settings for this function are as follows.
Dashstyle
NO WRAP
Each dot represents the start of the broken line.
Lines printed with the use of the broken line style shown in
the example will be printed as a non-broken line, as shown
in the illustration on the left. This is owing to the fact that
the dot appears before the line is broken, and this constitutes
the starting point for printing another line.
WRAP
Each dot represents the direction in which the broken line
must be printed.
Lines printed with the use of the broken line style shown in
the example will be printed as shown in the
illustration on
the left
.
These settings are only valid with Versatec VCGL data.
Menu Item Description
Joint style Sets joint processing for lines to [UNJOINT], [BEVEL],
[MITER] or [ROUND]. The default settings is [UNJOINT].
Refer to "Joint style" for further details (page 88).
This setting is only valid when printing poly-lines, polygons
and rectangles.
End style Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or
[TRIANGLE]. The default setting is [SQUARE].
Refer to "End style" for further details (page 88).
Dashed line
style
Sets broken line processing to [NO WRAP] or [WRAP].
The default setting is [NO WRAP].
Broken line style
Dot
Example