User Guide

87
4.5 Logical Printer Settings
Define Single Pen
Sets the width, color and other pen attributes for HPGL data.
Settings The settings for this function are as follows.
These settings are only valid with HPGL data.
Menu Item Description
Pen No. Sets the pen number within a range of 0 to 98.
Width Sets the line width within a range of 0 to 511.
1 = 0.0635 mm. The actual width of the line will be n
× 0.0635
with the line width set to n. The default setting is [2].
Lines may be printed by patches, if the line width is set
to [1].
Color Sets the line color at [BLACK] or [WHITE].
The default setting is [BLACK].
End style Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or
[TRIANGLE]. The default setting is [SQUARE].
Refer to the illustrations on the next page for further details.
Joint style Sets joint processing for lines to [UNJOINT], [BEVEL], [MITER]
or [ROUND]. The default setting is [MITER].
Refer to the illustrations on the next page for further details.
This setting is only valid for HP-GL and HP-GL/2 EA, EP,
ER, FP, RA, RR, and PE.