User's Manual

Maintenance Xerox
®
Duplex Combo Scanner
User Guide 6-7
The scanner should be calibrated as part of your monthly maintenance of the scanner. If the
scanner is used daily you may need to calibrate the scanner more often. You will need to have the
calibration page ready.
Caution: do not attempt to calibrate the scanner with any other type of document
(i.e. white paper or a copy of the calibration page).
The calibration routine will fail and indicate the failed calibration by flashing a red LED on the
scanner. A calibration page was included with your scanner, if you do not have one available,
you can order a replacement from the Parts & Accessories page for your scanner at
www.xeroxscanners.com
.
To calibrate the scanner:
1. Open the scanner’s hardware properties page as described on page 6-1.
2. Click on the Device Settings tab.
3. Click on the Calibrate button to start the calibration utility.