Operation Manual

Copying 37
Making One Quick Copy
Follow this procedure when you need to make one quick copy of your original
document.
1 Make sure the WorkCentre is powered on. Load paper in one of the
paper feeders. The Display should show the message 001 .
2 Open the platen cover. Make sure the
glass is clean. Load the document on
the document glass facing down and
pushed against the left and rear
guides.
3 Close the platen cover.
NOTE: If you do not close the platen cover or do not contact the
document completely with the document glass, scanning quality will be
severely reduced.
4 Press the Start button. The machine will make one copy with the
following features:
l Normal resolution
l Normal contrast
l Plain paper type
l 100% copy size (same as original)
l Single copy
l Color mode
5 For other copy features and functions, see the next section Using the
Copy Menu Features.