Operation Manual

2.19
User Guide
TWO-SIDED COPYING
2
Auto Clear
This WorkCentre is enabled at the factory to
return to the Normal Copy mode
approximately one minute after a job is
completed.
• Copy Quality - Auto
• Copy lighter/darker - Normal
• Priority Magnification - 100%
•Quantity Selected - 1
Adjust the side guide within 1/32 in.
Two-Sided Copying
Place one original face down on the
Document Glass, with the TOP toward the
LEFT. Lower the document cover.
Select quantity.
Press Start to make side 1 copy.
Note: 16 lb/60 g/m
2
paper is not
recommended for two-sided copying.
Note: Failure to follow this procedure
will cause paper jams and copy quality
defects.
1
2
3
Xe88qrg.bk Page 19 Thursday, February 17, 2000 4:25 PM