Operation Manual

2.5
User Guide
LOADING MEDIA
2
Push the paper release lever back. The paper
will be clamped by the paper feed roller inside
the printer.
Do not reuse the misfed paper.
Do not use materials that:
• are composed with glues, inks and
adhesive that could discolor, scorch, or
melt when heat is applied
• have cellophane windows, peel-off
adhesive strips
• are heavily textured, coated or embossed
• are cotton paper composed of more than
25% of recycled paper.
6
Note: Paper jams (E1) may
occur if:
• the paper lever is not used.
• the paper tray is overstacked.
• the space between the paper guide
and the left edge of the paper is
greater than 1 mm.
• the paper guide is pushing the
paper so hard that the paper
buckles.
• the paper is not stored properly
and absorbs moisture from the air
(replace the paper).
Xe88qrg.bk Page 5 Thursday, February 17, 2000 4:25 PM