LASER MULTIFUNCTION (4 IN 1) User's Guide WorkCentre PE16

C OPYING
4.12
2-up or 4-up Copying
The 2 or 4-up copying feature is available only when you load
documents in the ADF.
1 Load the documents to be copied in the ADF.
2 Press Special.
3 Press Special or the scroll button ( ¦ or  ) until “2-Up” or
“4-Up” displays on the bottom line.
4 Press Enter to save the selection.
5 If necessary, customise the copy settings including number
of copies, contrast and image type by using the control
panel buttons. See “Setting Copy Options” on page 4.6.
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button for making a 2 or 4-up copy.
6 Press Start Copy/Fax to begin copying.
NOTE: 2-up copy reduces your original document by 50 %. 4-up
copy reduces the document by the following rates depending on
the paper loaded: 76 % for Letter, 81 % for A4 and 95 % for
Legal.
Poster Copying
This special copy mode can be applied when you load document
only using the document glass. If a document is detected in the
ADF, the Poster copying feature does not work.
1 Load the documents to be copied on the document glass
and close the cover.
2 Press Special.
3 Press Special or the scroll button ( ¦ or  ) until “Poster”
displays on the bottom line.
4 Press Enter to save the selection.
1 2
1 2
3 4
2-up copying
4-up copying