User guide

Before You Start
Before You Start FP1
Fax (Phone)
Before starting the setup:
● You cannot use this machine with a call waiting service.
● A facsimile located close to a main unit of a cordless phone can cause distorted images or interrupted transmission. This
machine should be installed at least five meters away from the main unit of the cordless phone.
● If the digital line leased for your company network is multiplexed, facsimile communication may be restricted as follows:
■ The features using our unique transmission method, such as Recipient Print Sets, Relay Broadcast and Remote
Mailbox, are not available.
■ The transmission speed is limited.
■ Super G3 cannot be used.
Communications modes:
● G3 (Auto) - Normal Fax communications, the machine automatically switches modes in the following order of priority:
Unique SG3 - Unique ECM - Unique G3 - ITU-T SG3 - ITU-T ECM - ITU-TG3 depending on the capabilities of the remote
terminal.
● F4800 - Select this mode when transmitting over noisy or bad telephone lines, as can be the case with overseas calls.
Connecting the phone line:
1 LINE 1
Connect the fax to a public switched telephone network (PSTN).
An external telephone cannot be connected.
2 TEL An external telephone is connected here.
3 LINE 2 (Line 2) Connect to a public line.
4 LINE 4 (Line 4) Connect to a public line.
Click to continue on to System Settings:
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/fp1-beforestart.htm [9/4/03 8:33:06 AM]