Instruction Manual

9 Setups
154 Xerox CopyCentre/WorkCentre 118 User Guide
Transmission Report
Configure the settings for printing report that shows the result of transmission.
• Single Destination – Configure the settings to be used when sending fax to a single
destination. If you select [Undelivered], the machine prints a report only when
transmission fails.
• Multiple destination – Configure the setting to be used when sending fax to multiple
destinations. If you select [Undelivered], the machine prints a report only when
transmission fails. With [As Single Dest’n] selected, the machine follows the setting
made for [Single Destination].
• Original Image – Specify whether to print out scanned documents with a report.
Activity Report
Specify whether or not to automatically print the report of the transmission result every
50 transactions.
NOTE: When the report output is disabled for reasons such as paper out, the machine
stores and retains the information until the output is enabled. However, only up to 96
of the latest transaction information can be stored.
Power Off Report
Specify whether or not print the Power Off Report that shows the details of stored
documents deleted due to the power failure. The machine automatically prints a report
when the machine is restarted.
Customize Screens
Use this feature to rearrange the locations of menu items on the Fax screen. After
selecting [Customize Screens], select the item you want to rearrange using the
<Select> button, and then select the new locations pressing the <I> or <J> button.
E-mail Settings
This section describes how to configure or change the settings for sending scanned
documents as e-mail attachments. For more information, refer to the following.
Resolution – page 155
Lighten/Darken – page 156
Reduce/Enlarge – page 156
Scan Size – page 156
File Format – page 157
Transmission Report – page 157