Color Laser Printer User Guide

Loading Paper
Xerox WorkCentre C226 User Guide 1-29
Specifications (stand/1-Tray Unit/3-Tray Unit)
Specifications are subject to change for improvement without notice.
Loading paper in the Duplex Module/2-Tray Unit
Upper tray:
The upper tray contains a Duplex Module that automatically turns print paper over for
automatic two-sided printing.
Middle and lower paper trays:
The middle and lower trays are paper trays.
Up to 500 sheets of paper recommended for colour or Xerox-recommended plain
paper can be loaded in these trays. The method of loading paper is the same as for
Paper Tray 1 in the main unit. See the explanation on page 1-21.
NOTE: If the size of paper being loaded is different from the previous size, or is an extra size,
or if the paper type is different from the previous type, you must change the paper tray
settings in the custom settings. Change the settings as explained in “Setting the paper
type (except the Bypass Tray)” on page 1-33 and “Setting the paper size when an
extra size is loaded” on page 1-34.
Name Stand/1-Tray Unit 3-Tray Unit
Paper size/weight A3, B4, A4, A4R, B5, B5R, A5, Extra. (11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2")
/ 64 to 105 g/m2 or 17 to 28 lbs.
Paper capacity Paper recommended for colour (80 g/m2 or 21 lbs.): 500 sheets;
Xerox standard paper (80 g/m2 or 21 lbs.): 500 sheets
Power supply Supplied from the main unit
Dimensions 600 mm (W) x 642 mm (D) x 403 mm (H) (23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H))
(not including the adjuster)
Weight Approximately 22.5 kg or 49.6 lbs. Approximately 29.5 kg or 65.0 lbs.