User guide

1-60 Xerox WorkCentre C226 User Guide
General Information
Using the Saddle Stitch Finisher
Touch the [More...] key in the Output display on the main screen of copy mode to dis-
play the screen that allows selection of sort, staple sort, centreline stapling, group
function, and the output tray.
[GROUP] key When Group is selected, all copies of the same original will be grouped.
[STAPLE SORT]
key
When Staple Sort is selected, sorted sets will be stapled and delivered to the offset
tray. (They will not be offset stacked.)
[SORT] key When Sort is selected, sets of copies will be sequentially delivered.
[FINISHER
TRAY] key
When the offset function is selected, output goes to the offset tray. (The offset tray is
automatically selected when the staple sort function is turned on.)
[OFFSET] key The offset function operates when "Yes" is selected, and doesn't operate when "No" is
selected. (The offset checkmark is automatically cleared when the staple sort function
is turned on.)
[CENTRE TRAY]
key
If the centre tray is selected, output paper will be delivered to the exit tray located
above the main unit.
[OK] key Touch to close the [OUTPUT] screen and to return to the main screen.
[SADDLE
STITCH] key
When saddle stitching is selected, the copies will be stapled at the centre and deliv-
ered to the saddle stitch tray.
Touch this key to display the pamphlet copy setting screen (page 2-71). (This is only
possible when a checkmark appears in the checkbox of the [AUTOMATIC SADDLE
STITCH] key operator program)
[PUNCH] key If the Saddle Stitch Finisher is equipped with a hole Punch Module, printed paper can
be hole punched and delivered to the offset tray.
* When one of the functions is selected, it is highlighted.
Output
OK
Saddle
Stitch
Punch
Finisher
Tray
Centre
Tray
Staple
Sort
Sort
Group
Offset