User guide

Misfeed Removal
Xerox WorkCentre C226 User Guide 1-55
Make sure that there is no misfed paper in the machine.
9. Pull out the Duplex Module of the Duplex Module/2-Tray Unit.
10. Remove the misfed paper from the Duplex Module.
11. Gently close the Duplex Module.
Push the tray firmly all the way into the machine.
12. Gently close the Duplex Bypass /Inverter Unit.
Misfeed in the upper or lower tray
To remove misfed paper from the upper tray or lower tray, follow steps 1 through 5 of
“Misfeed in the stand/1-Tray Unit” beginning on page 1-52.
Be careful not to tear the
misfed paper during
removal.