User guide

1-50 Xerox WorkCentre C226 User Guide
General Information
Exit area
Models with an exit tray attached to the Duplex
Bypass/Inverter Unit:
Gently remove the misfed paper as shown in the illustra-
tion, taking care not to tear the paper.
Models without the Duplex Bypass/Inverter Unit:
Gently remove the misfed paper as shown in the illustra-
tion, taking care not to tear the paper.
Upper exit tray:
Gently remove the misfed paper as shown in the illustra-
tion, taking care not to tear the paper.
Fusing area
1. Open the Duplex Bypass/Inverter Unit.
Grasp the finger hold and gently open the unit.
2. Remove the misfed paper as shown in the illustrations below.
If paper is misfed in the transport area, turn roller rotat-
ing knob A in the direction of the arrow to remove the
misfed paper.