User guide

F-Code Confidential Transmission
Xerox WorkCentre C226 User Guide 5-57
F-Code Confidential Transmission
F-code confidential transmission is performed in the same way as a normal transmis-
sion; however, you must enter the sub-address (SUB) and passcode (SID) after the
fax number of the other machine. (You can omit the passcode if the other machine
does not use a passcode.)
For the procedure for entering sub-addresses and passcodes, see “Entering (Dialing)
a Fax Number with a Sub-Address and Passcode” on page 5-51.
F-code confidential reception is performed in the same way as normal reception (see
“Basic Operations”); however, you must inform the other party of the sub-address
(SUB) and passcode (SID) of your confidential memory box. (If a passcode is not pro-
grammed in the confidential memory box, only inform the other party of the sub-
address (SUB).)
NOTE: An F-code confidential transmission can be used in combination with the broadcast
transmission function (page 5-30) or timer transmission function(page 5-33), and can
be stored in a program (page 5-85).
Printing a Document Received to an F-Code
Confidential Memory Box
Faxes received in an F-Code confidential memory box are printed out by entering the
PRINT PIN 4-digit passcode (0000 to 9999) that was programmed when the box was
created.
NOTES: • You can have a transaction report printed each time a fax is received in an F-Code
confidential box to inform you of the reception. This setting is enabled in the key
operator programs (see the “Fax Unit” section of the WorkCentre C226 System
Administration Guide).
• Document data received to an F-code confidential memory box is automatically
cleared after printing.
• When a new fax is received to an F-code confidential box while a previously
received fax is still stored in the box, the new fax is added on after the previous
fax.
1. In fax mode, touch the [SPECIAL MODES] key and then touch the [MEMORY
BOX] key.
If the address directory screen appears, touch the [CON-
DITION SETTINGS] key to display the condition settings
screen.
The memory box menu screen appears.
To cancel the operation, touch the [CANCEL] key.
OK
Memory Box
Address ReviewSpecial Modes