User guide

5-48 Xerox WorkCentre C226 User Guide
Fax Unit
Transferring received data
1. Press the [CUSTOM SETTINGS] key.
2. Touch the [FAX DATA FORWARD] key.
If there is no data to transfer or a transfer number has not
been programmed (See the “Fax Unit” section of the
WorkCentre C226 System Administration Guide.), a
message will appear and transfer will not be possible.
3. Touch the [YES] key.
The machine automatically dials the transfer destination
programmed with the key operator program and begins
transfer.
If you do not wish to transfer the data, touch the [NO] key.
NOTES: • To cancel transfer
Press the [JOB STATUS] key, and then cancel the transfer in the same way as a
transmission. (See “Cancelling a Fax Transmission” on page 5-27.)
The data that was going to be transferred will return to print standby status in your
machine.
• If the transfer is not possible because the line is busy or a transmission error
occurs, the data returns to print standby status in your machine.
/
Clock
int
Fax Data
Forward
ive
gs
Yes
Transfer The Received Data To Another
Device?
No