User guide

Automatic Transmission at a Specified Time (Timer Transmission)
Xerox WorkCentre C226 User Guide 5-33
Setting Up a Timer Transmission
1. In fax mode, touch the [SPECIAL MODES] key.
If the address directory screen appears, touch the [CON-
DITION SETTINGS] key to display the condition settings
screen.
2. Touch the [TIMER] key.
The timer transmission screen appears.
3. Select the day of the week. (Touch the key or the key until the desired day
is selected.)
The initial setting is "---" (no selection). If you select this
setting, the transmission will be performed as soon as
the specified time arrives.
Select the time. (Touch the key or the key until the
desired time appears.)
4. Select the time in 24-hour format.
Example:
11:00 P.M. 23:00
The current time appears at the top of the screen. If the time is not correct, press
the [CLEAR ALL] key to stop operation and adjust the date and time. (Refer to
page 1-39.)
5. Touch the outer [OK] key.
You will return to the screen of step 1 and a timer trans-
mission icon will appear next to the [EXPOSURE] key.
To cancel timer, touch the [CANCEL] key.
Add
Dire
Sub Ad
Address Special Modes
Auto Reception
Special Modes
Timer
Day Of The Week
imer
0000
Cancel
Time
HH.
mm.
Ok
mm.
00
Ok
Cancel