User guide

4-64 Xerox WorkCentre C226 User Guide
Network Scanner Operation
Using the Key Operator Programs
Follow the steps below to use the key operator programs.
1. Press the [CUSTOM SETTINGS] key.
2. Touch the [KEY OPERATOR PROGRAMS] key.
3. Use the numeric keys to enter the five-digit key operator code number.
Each time a number is entered, the dashes (-) in the dis-
play will change to asterisks ( ).
4. Touch the [N/W SCANNER SETTINGS] key, depending on the program you wish
to use.
5. Make desired settings for the selected program.
Detailed descriptions for program settings start on page 4-65.
/
Address
Control
ADDRESS
CONTROL
Receive Mode
Key Operator Programs
Key Operator Code
N/W Scanner
Settings
Key Operator
Code Change
Energy Save
Product Key
Operation
Settings
Printer
Settings