User guide

If Your E-Mail Is Returned
Xerox WorkCentre C226 User Guide 4-59
If Your E-Mail Is Returned
If a Scan to E-mail is not successfully transmitted, an e-mail informing you of this fact
is sent to the sender selected at the time of transmission. If this happens, read the e-
mail and determine the cause of the error, and then repeat the transmission.
If a Transmission Error Occurs
If a transmission error occurs when you send a scanned image, a message informing
you of the error and an error code will appear in the touch panel on the machine.
Error Code Table
Solution: In order to select resolution and data compression settings that are suited to the purpose of
transmission and create image data that is well-balanced in terms of resolution and file size, pay
attention to the following points:
Resolution ("STANDARD", "HIGHER", "HIGHEST")
The default setting is "LOWER". If the original does not contain photographs, illustrations, or
other halftone images, "STANDARD" mode will give you a more workable scanned image.
"HIGHER" or "HIGHEST" should only be selected when the original includes a photograph and
you want to give priority to the quality of the photograph. Note that scanning in "HIGHER" or
"HIGHEST" mode will produce a larger file size than the other modes.
Error Code Description of the Error
CE-01 The optional network interface card (Print Server Card) is not installed or is out of order.
CE-02 Cannot find the specified mail server or FTP server.
CE-03 The server was unavailable during the scanning of the original.
CE-04 An invalid account name or password for the FTP server has been entered.
CE-05 An invalid directory of the FTP server has been entered.
CE-06 Cannot find the specified mail server (POP3 server).
CE-07 The account name or password for the POP3 server is invalid.
CE-00 An error other than the above has occurred.