User guide

4-36 Xerox WorkCentre C226 User Guide
Network Scanner Operation
Selecting the Exposure
You can adjust the exposure manually to match the type of original. After loading the
original in scanner mode, follow the steps below. The default setting for the exposure
is "AUTO".
Change the exposure
1. Touch the [EXPOSURE] key.
2. Select [AUTO] or [MANUAL].
If you selected [AUTO], the exposure will be adjusted
automatically. (Only for black and white scanning. If
[AUTO] is selected for colour scanning, scanning will
place at exposure level "3" of the manual settings.)
If you selected [MANUAL], touch the or key to
adjust the exposure. (For darker contrast, touch the
key. For lighter contrast, touch the key.)
3. Selecting the original type.
Touch the appropriate key for the type of original to be scanned. The image will be
processed according to the selected type.
When [AUTO] is selected in step 2
If "AUTO" is selected in step 2, you can select the origi-
nal type from "TEXT/PRTD. PHOTO", "TEXT/PHOTO"
or "TEXT".
Auto
Lower
Resolution
Auto
Exposure
Programmed
File Format
OK
Moiré
Reduction
Auto
Manual
Text
Text/
Prtd.Phot
Text/Photo
Reduction
Manual
Text
Printe
Photo
Text/
Prtd.Ph
OK
Text
MAP
PHOTO
PRINTED
PHOTO
Text/Photo
Text/
Prtd.Photo