User guide

Basic Transmission Method

Xerox WorkCentre C226 User Guide 4-25

9. Touch the [OK] key.

10. Touch the [ADDRESS DIRECTORY] key.

The address directory screen appears.

11. Touch the one-touch key for the desired destination.

The key you touched is highlighted. If you touch the

wrong key, touch the key again to cancel the selection.

The key display will return to normal.

When transmitting by Scan to E-mail

Make sure that the [TO] key is highlighted and then touch the one-touch key of the

destination. If you wish to perform a broadcast transmission, "CC" or "BCC"

copies, touch the [CC] or [BCC] key and then touch the one-touch keys of the

"CC" or "BCC" recipients.

NOTES: • Refer to pages 4-10 to 4-15 for information on programming one-touch key

destinations.

• When touching a one-touch key, corresponding information from the email

destination screen is shown in the message display. Up to 36 characters can be

displayed in the message screen, regardless of the number of characters that

have been entered (up to 50 characters of an e-mail address are displayed).

• You can also manually enter the address of a Scan to E-mail destination, or select

multiple destinations for a broadcast transmission. (page 4-27)

1 Group

-Mail Address

Address