User guide

Basic Settings for Network Scanning

Xerox WorkCentre C226 User Guide 4-9

* If you are entering a host name, be sure to enter the IP address of your DNS server

in the DNS settings below.

DNS Setup

POP before SMTP Select this checkbox if an SMTP server that authenticates users during the

"POP before SMTP" procedure will be used. After selecting the checkbox, the

POP3 Server, Port Number, APOP, User Name, and Password text boxes under

the checkbox can be entered. Enter the information necessary for authentica-

tion in these text boxes.

Item Description

Primary DNS Server Enter the IP address of your primary DNS server here if required.

Secondary DNS Server Enter the IP address of your secondary DNS server here if required.

Timeout [seconds] Enter a time out period, from 0-60 seconds, that the system will wait for as it

attempts to connect to the primary server. The default is 20 seconds. If no con-

nection is made, the system will then look for the secondary server if it has been

set up. If not, the system will stop attempting to connect.

Domain Name Enter the Domain Name of the DNS Server to be used to search for host names

within 64 characters.