User guide

Xerox WorkCentre C226 User Guide 4-1
4 Network Scanner Operation
Introduction
An option is available that enables the machine to be used as a network scanner. This
section explains only the network scanner functions of the product. For information on
loading paper, replacing toner cartridges, clearing paper misfeeds, handling peripheral
units, and other copier-related information, please refer to Chapter 1, “General Infor-
mation” and Chapter 2, “Copier Operation”.
NOTES: • Before using the network scanner feature, several settings must be established
from the Web page. These settings are explained from page 4-3 on. The settings
must be established by the network administrator. Such settings must be effected
by the system administrator who has the special network related backgrounds.
• The explanations in this section assume that the person who will install the
product and the users of the product have a working knowledge of Microsoft
Windows.
• For information on the operating system, please refer to your operating system
manual.
• This section assumes that several options have been installed.
Options required to use the network scanner function
• Scan kit
• Memory
To use the network scanner function in colour up to 300 dpi or B/W mode up to
600 dpi
For printer controller: Add one 256-MB module